How to Install a Ghost Immobiliser
A ghost immobiliser can be an effective deterrent for car thieves. By combining this device with other security systems and remaining vigilant, you can create a robust defense against modern, technologically-savvy thieves.
A ghost immobiliser will protect your vehicle from hotwiring and relay car thefts by requiring you to enter a pin code in order to start the car. It uses existing buttons located in your centre console or steering wheel, which means it's undetectable to criminals.
Identifying the Wires
With increasing numbers of vehicles being stolen with no owner's keys, it is important to protect your vehicle. While thieves may be able to clone your key fob or even take the car by hacking its system, a ghost immobiliser adds an extra layer of security by blocking all signals coming from the key fob and making it impossible to start your vehicle without entering a PIN code.
While you can install a ghost immobiliser yourself, it is recommended to have an expert technician complete the task for you. A professional with experience will know where to place the unit and how to connect it to your vehicle's wiring. Installation can be difficult and it's crucial that the connections are made properly to avoid any damage or malfunctions.
To get the most effective results, you must work in a well-lit location and wear appropriate safety gear. You should also read through the user's manual and familiarize yourself with the wiring system. This will aid you in identifying the wires required for the installation and make sure that you have the right tools and parts to do the job correctly.
After the wiring is connected, you can connect the battery and check the system to see if it is functioning properly. It is also important to ensure that the battery's terminals are secure to prevent electrical problems. You should also mark the CAN L and CAN H wires with labels or tape to be capable of keeping track of them throughout the installation process.
If you would like to allow another person to drive your vehicle for a short period of time for a valet parking or when the vehicle is in for service, the Ghost Immobiliser can be put into Transport Mode. You can enter the code by pressing an option on the steering column, centre console or door panels. Then, the Ghost Immobiliser will enter the mode of changing the PIN code.
Some thieves attempt to evade the ghost immobiliser using spoofing or jamming devices to block or send fake signals to the system. ghost immobiliser tracker can be avoided by investing in the latest anti-jamming technology and regularly monitoring your Ghost Immobiliser to detect signs of altering the system.
Disconnecting the Battery
The ghost immobiliser is a modern security device, has been designed to deter theft of cars. It uses innovative technology to monitor and deactivate the engine once the correct PIN code is entered, thereby stopping the vehicle from being driven away by thieves. The system is extremely efficient and stealthy, with no visible indicators to stop criminals. However, there could be the time that you need to remove the device for maintenance or upgrades, or even to sell your car.
This procedure requires special tools and expertise, since you will be working with wires and bypassing certain factory components. It is also important to follow the step-by- guideline given by the manufacturer. You should also seek advice from an experienced auto electrician or mechanic, particularly if you don't have any prior experience working with cars.
After identifying the wires and disconnection it is crucial to examine the condition of your battery. Check that the battery is clean and free of corrosion, and that all connections are secure. If necessary, think about replacing the battery to ensure that it is strong enough to handle the electrical demands of a security system that is aftermarket.
Once you have disconnected the wiring from the battery, you can start to take out the ghost immobiliser. Strippers or wire cutters can be used to disconnect the wires. Be careful not to damage them or their terminals. Label each wire so that it is easier to reconnect them in the future. If the wires were connected, use a heat resistant tool to break the connection. It is also crucial to insulate the cut wires by using insulation tape or heat shrink tubing to keep them from short circuits.
Connect the wires using the 12V constant power source. Use a fuse tap to protect the connections with fuse. Connect the grounding wire with a solid grounding to the chassis of your vehicle.
After you have connected the wires, restart your vehicle and enter the PIN code. Then, try to start the engine once more. If the engine doesn't start then you have successfully removed the ghost immobiliser.
Making the Connections
Ghost immobilisers are an affordable method to increase the safety and security of your vehicle. It is connected to your car's CAN bus system, intercepting signals and preventing the engine from running until the correct PIN code is entered. It is nearly impossible to circumvent. It's an excellent choice for those who want security and peace of mind. In conjunction with a Thatcham Approved tracking system, it can also help to lower your insurance premium.
It is essential to obtain and review the wiring diagram of the vehicle model before you start the installation. The diagram serves as a guideline for finding the wires needed to create precise connections. Making use of the correct wiring connectors or soldering techniques will ensure that the connection is long-lasting and secure.
The wires connecting the Ghost immobiliser to the CAN bus must be properly identified and connected. It is recommended to use small pieces of tape or labels to identify the CAN H and L wires. This will avoid confusion during the installation process. These wires are located differently on each vehicle. It is essential to look up the wiring diagram or online resources in order to identify them.
Once the correct wires are connected after which the power to the Ghost immobiliser will be restored. It is recommended to test the immobiliser's operation by starting the engine but not entering the PIN code. This will ensure that the immobiliser was installed correctly and is functioning as intended. It is important to test your immobiliser on a regular basis. This will help you detect any issues or problems early.
Another benefit of the ghost immobiliser is that it can be set up in a matter of minutes and doesn't require any cutting or modification to your vehicle's internal wiring. It is a fantastic option for those looking to add more security to their vehicle, since it can work in conjunction with an Thatcham approved alarm or tracker to send you a notification on your smartphone or tablet in the event that the vehicle is damaged.
Mounting the Unit
The Ghost immobiliser is a great deterrent to car thieves, especially when it is paired with the GPS tracking system. The device uses buttons on the centre console, doors, and steering wheel to create a unique sequence you can only recognise. This prevents your car from getting started. The device is also weatherproof and tamper-proof. It comes with a 3-year warranty and is recommended for use by a variety of insurance companies.
When installing the system it is essential to follow the instructions carefully. While some people are able to handle the task themselves, it's best to seek out a professional you are unsure. Wire strippers and multimeters are essential tools to locate the wiring and create precise connections. You should also purchase insulation and electrical tape to protect your connections from damage. After the installation is completed, it's a good idea test the device to ensure that everything is working as it should.
Ghost immobilisers are an excellent option to protect your vehicle, especially in areas that have high rates of crime. It can be integrated with an iPhone application to facilitate management and monitoring. It prevents key-cloning, ECU-swapping, and other security threats. It is popular with car owners who want to protect their investment.
The Ghost II immobiliser is designed with a slim, low-profile appearance that makes it unnoticeable by thieves. It connects to the CAN (Controller Area Network) system of your vehicle and blocks the engine from being started without a PIN code being entered. The PIN code can be generated by pressing a set of buttons on your steering wheel, console or the door. It is also able to be changed at any time. The device is also tamper-proof and includes an GPS tracking system to assist police in locating your car in case of theft. It's a great choice for protecting your car from thieves and is fully Thatcham certified.